Pump Controller 701

  • Measuring range​
    4-20 mA (0 - 0,3 m / 0 - 1 m / 0 - 3 m / 0 - 10 m / 0 - 30 m / 0 - 100 m / 0 - 300 m)
  • Accuracy​
    ± 1.0 %
  • Enclosure​
    IP 22
  • Input signal​
    From pressure transmitter (4-20 mA)
Request A Quote

The Pump Controller 701P is a compact unit for level control of one pump and one level alarm, or two alternating pumps.

The Pump Controller 701P is designed for DIN-rail mounting. The Pump Controller 701Pis supplied either complete with sensor,cable bracket or as a separateunit.

Suitable sensors for Pump Controlle 701Pare pressure transmitter types 7070, 1400,7060 and 3400.

Pressure transmitters 7060 and 3400 are made of polypropylene and suited for measurement in waste water and sludge.

 Pressure transmitters 7070 and 1400 are of stainless steel with a small outer diameter and are used for clean liquids, for example in water drillings.

General Specification
Measuring range 4-20 mA (0 - 0,3 m / 0 - 1 m / 0 - 3 m / 0 - 10 m / 0 - 30 m / 0 - 100 m / 0 - 300 m)
Supply

220 - 240 V AC or 110 - 130 V AC

Temperature - 20 … + 60 °C
Input signal From pressure transmitter (4-20 mA)
Accuracy ± 1.0 %
Outputs 2 relays with voltage free change-over switch.
250 V, 4 A resistive load (inductive 100 VA).
Operation From front panel
Dimensions 86 x 70 x 60 mm (h x w x d)
Enclosure IP 22

The Pump Controller 701P is designed for measurement and control of levels in tanks, containers and drillings.

The Pump Controller 701P is used for control of pumps in pumping stations, sewage plants, water works andthe processing industry.

In general the Pump Controller 701P is used for control of 1 pump with 1 level alarm or 2 pumps between adjustable levels.