Portable Energy Meter For Hazardous Areas- F608

  • Extremely resistant
    Designed for ATEX, IECEx and FM Zones, IP65
  • Flow Velocity
    0,01 ... 25 m/s
  • Accurate and reliable measurement
    Even with high contents of solids / gas bubbles due to the new HybridTrek mode
  • Data Logger
    Capacity > 100 000 measured values
  • Application
    temperature-compensated calculation of mass flow rate, integrated heat flow computer for monitoring of energy flows and including energy calculator for BTU and heat measurements
Request A Quote

The portable flow meter FLUXUS F608  is based on the widely used, highly reliable and versatile F601, but has been specifically engineered for its use within hazardous areas and is covered by an ATEX, IECEx and FM certification.

The FLUXUS F608 being equipped with two flow channels, multiple In- and Outputs and an integrated data logger with a serial interface, the flowmeter is designed for direct usage in demanding environments, such as in the Upstream, Midstream and Downstream area as well as in the processing industries and the energy sector.

General Specification
Flow velocity

0.01...25 m/s

Operating temperature of the transmitter --10°C ... 60°C
Degree of protection IP65
Explosion protection ATEX / IECEx Zone 2 and FM Class I, Div. 2, Transducers: ATEX Zone 1 and 2 and FM Class I, Div.1 / 2
Repeatability  0.15 % of reading ±0.01 m/s
Medium

all acoustically conductive liquids with < 10 % gaseous or solid content in volume (transit time difference
principle)

Measurement accuracy

±1.6 % of reading ±0.01 m/s (standard)
±1.2 % of reading ±0.01 m/s (extended calibration)

Power supply 100...240 V/50...60 Hz (power supply unit, outside of explosive atmosphere),
10.5...15 V DC (socket at transmitter, with power adapter (optional)),
integrated battery
Number of flow measuring
channels
Two
Display 2 x 16 characters, dot matrix, backlight
Physical quantities volumetric flow rate, mass flow rate, flow velocity,
heat flow (if temperature inputs are installed)
Totalizer volume, mass, optional: heat quantity
Data Logger capacity > 100 000 measured values
Loggable values all physical quantities and totalized values and diagnostic values
Communication Interface RS232/USB
Outputs Current, Frequency, binary
Inputs Temperature, Current, Voltage
Application 

temperature-compensated calculation of mass flow rate

integrated heat flow computer for monitoring of energy flows

including energy calculator for BTU and heat measurements

Sensor Specification
Pipe diameters range:

10 mm ... 12.000 mm

Media temperature -40°C ... 200°C (-160°C ... 400°C with High Temperature WaveInjector mounting fixture)