Portable Energy Meter - F601

  • Flow Velocity
    0,01 ... 25 m/s
  • Accurate and reliable measurement 
    Even with high contents of solids / gas bubbles due to the new HybridTrek mode
  • Data Logger
    Capacity > 100 000 measured values
  • Application 
    simultaneous monitoring of flow and energy flow, e.g. heating systems
Request A Quote

The FLUXUS F601 portable clamp-on flow meter is also available in an "Energy" and"Multifunctional" version , allowing the measurement of  thermal energy / BTU flows and making the flow meter the ideal companion for the analysis or auditing of heating and chiller plants. The collected data can be used to perform a complete energy balance or to assist during process monitoring and optimization.

General Specification
Flow velocity

0.01...25 m/s

Operating temperature of the transmitter --10°C ... 60°C
Degree of protection Electronic unit: NEMA 4X / IP65
Transport case: NEMA 6 / IP67
Repeatability  0.15 % of reading ±0.01 m/s
Medium

all acoustically conductive liquids with < 10 % gaseous or solid content in volume (transit time difference
principle)

Measurement accuracy

±1.6 % of reading ±0.01 m/s (standard)
±1.2 % of reading ±0.01 m/s (extended calibration)

Power supply 100...240 V/50...60 Hz (power supply unit),
10.5...15 V DC (socket at transmitter),
integrated battery
Number of flow measuring
channels
Two
Display 2 x 16 characters, dot matrix, backlight
Physical quantities volumetric flow rate, mass flow rate, flow velocity,
heat flow (if temperature inputs are installed)
Totalizer volume, mass, optional: heat quantity
Data Logger capacity > 100 000 measured values
Loggable values all physical quantities and totalized values and diagnostic values
Communication Interface RS232/USB
Outputs Current, Frequency, binary
Inputs Temperature, Current, Voltage
Application 

temperature-compensated calculation of mass flow rate

integrated heat flow computer for monitoring of energy flows