U1000MKII
- Diameter Range
22mm - 180mm OD - Measurement Technique
Transit time For “clean” liquid monitoring -
Accuracy +/-1% – 3% of flow reading for >0.3m/s (1ft/s).
The U1000MKII is an ultrasonic permanent/fixed clamp-on flow metering solution for measuring preset flow rate – l/m with a volume pulse output in litres and with a 4-20mA flow rate signal, which can be used as a stand alone meter or as an integral part of an aM&T or BEM’s system.
The U1000MKII is intended to operate on steel copper and plastic pipes with ID’s in the range 22mm to180mm
Simple to install – clamp-on to the pipe, connect power and enter the pipe diameter, no specialist skills or tools required!
A cost effective alternative to traditional in-line meter installation, plus dry servicing, providing minimum downtime and maximum availability!
Compact, rugged and reliable, the U1000MKII has been designed to provide sustained performance in industrial environments.
General Specification | |
---|---|
Measuring Technique | Transit time |
Measurement channels | One |
Flow velocity range (bi-directional) |
0.1 to 10 m/s |
Operating temperature (Electronics) | 0°C to +85°C. |
Turn down ratio | 200:1 |
Flow measurement accuracy |
+/-1% – 3% of flow reading for >0.3m/s (1ft/s). |
Repeatability | ±0.5% of measured value |
Pipe Diameter | 22mm OD-180mm OD. |
Outputs |
4-20mA and Pulse output |
Power input | 12-24V AC or DC |
Display | LCD: 2 line x 16 characters |
Keypad Format | 4 key tactile feedback membrane keypad |
Chilled water
Domestic water